Describe
(1)Material: UPVC, CPVC
(2) Size: 2"-12", DN50-DN300, dn63-dn315
(3)Standards: ANSI, DIN
(4) Connection: flange
(5) Working pressure: 150PSI, 1.0MPa
(6)Operating temperature: UPVC(-10C-60C)CPVC(-10C-90C)
(7) Minimum air pressure: 45PSI, 0.4MPa
(8) Body color: UPVC (dark gray) CPVC (light gray)
Actuator working mode double-acting/single-acting (NC normally closed, NO normally open)
| Specification | 63 | 75 | 90 | 110 | 140 | 160 | 225 | 280 | 315 |
| 2" | 21/2" | 3" | 4" | 5" | 6" | 8" | 10" | 12" | |
| Control stress | 4~8 | ||||||||
| NAMUR standard air source interface | G1/4" | ||||||||
| Double acting actuator model | AT63D | AT63D | T75D | AT83D | AT92D | AT105D | AT125D | AT140D | AT160D |
| Single acting actuator model | AT63s | AT75s | AT83s | AT92s | AT150s | AT125s | AT140s | AT160s | AT190s |
(1) The actuator has passed the impact test, acid and alkali test, and the material complies with SGS
(2) Valve opening 0°-90°
(3) The connection between the actuator and the valve complies with ISO5211 standard
(4) 100% performance test of the valve before leaving the factory:
(5) The cylinder body is made of extruded aluminum alloy, and the inner hole and outer surface are hard anodized for longer service life and low friction coefficient;
(6) Integrated design. All double-acting and single-acting actuator models have the same cylinder body and end cover. It is easy to change the mode of action by installing and removing the spring.
(7) The air source interface complies with NAMUR standards and can be directly installed with NAMUR standard solenoid valves.
